For more information on any of our products and services please contact us at
The most cost-effective inert gas system.
The Complete Package
Since its European introduction in 2003, Fike's innovative ProInert® has become widely accepted as one of the best performing, most cost-effective, and environmentally friendly inert gas fire extinguishing systems. Now that same technology is available in the United States, and other parts of the world requiring UL and FM approval.
Fike's ProInert offers all the benefits of other inert gas systems with several significant design improvements - enhancements that not only mean a superior product, but savings to your bottom line!
Most inert gas systems discharge from the nozzle into the protected space with a high surge flow rate, creating a hazardous pressure peak. These systems use pressure reducers further down the pipe network in order to mitigate safety issues, but also require both high-pressure and low-pressure piping.
ProInert is Better
Because of its unique patented valve assembly, the ProInert agent enters the protected room within the industry required 60 seconds, but at a steady flow rate -- preventing destructive turbulence from occurring. This constant flow rate means you can use small-diameter, low pressure (and less expensive) piping from the inert gas container, all the way to the nozzle. And the necessary venting area is much smaller - reducing installation costs by as much as 60% on venting hardware.
ProInert's patented constant flow rate valve translates into a system that is not only safer for your staff and facility, but also saves you money
Other ProInert Inert Gas System Benefits:
Zero Ozone Depletion for maximum environmentalism
Superior design allows for convenient long pipe runs
Constant flow rate reduces hazardous pressure peaks
Typically requires less floor space than other inert gas systems
USGBC LEED® Recognized
Extinguish a Fire Naturally
ProInert is also the most environmentally friendly gaseous fire extinguishant on the market.
The inert gas blend in ProInert is naturally occurring, which means it has zero ozone depletion and zero global warming potential. Now the manufacturer of the highest quality, efficient clean agent fire protection systems on the market brings you the most cost-effective inert gas system available
Globally Approved and Recognized
Included in ISO
Included in EN14520
Included in NFPA 2001
US EPA SNAP Listed
While inert gas fire suppression systems are an excellent, environmentally sound means of protecting key assets and rooms, one thing is clear –— adding an additional 50% volume into a protected space (the fire suppressant agent) will cause a pressure increase, which can cause damage to the room, if not vented. With High-X vents, pressures are kept within acceptable levels and the inerting gas remains in the protected space for the required time, to allow the fire to be completely extinguished. And the patented High-X design makes it the most economical choice in fire suppression venting.
Fully Open at 95.5 Pascals
Full European and US Fire Test Approval
NOTE: Not available in all markets.